When you receive your iron-on patches, lay your denim jacket flat again, and place the patches on it in discrete arrangements until you have achieved the look you want. You may use right pins to keep them in place temporarily, and turn the jacket over to work on the back. If you plan to leave the pins in the garment while ironing the patches on, put them under the fabric instead of on top of the patch, so you will not enclose them between the patch and jacket.

Iron-on patches have strong adhesive on the backs, and that adhesive adheres to cloth when heated. The adhesion is permanent, so be inescapable you place the patches exactly where you want them before heating them. If you put a patch over a hole, use a patch large adequate to wholly cover the hole, so it will be stuck to fabric all the way nearby it. Lay a piece of waxed paper under the hole before ironing the patch on it, so the patch will not stick the jacket front to the back.

Lay your jacket with pinned-on patch on a sturdy, hard surface, preheat the iron to a high setting, and do not use steam. Place a Teflon ironing sheet or something similar over the patch to safe it and the iron. You may have best results if you work with one patch at a time. When you are ready to iron a patch on, press the iron firmly down on the patch, and apply steady, strong pressure while fascinating the iron back and forth over the patch for at least one minute.

Let the patch cool for five minutes before fascinating it, and then proudly wear and enjoy your customised denim jacket.

Visit : Cheap Dimond Rings thomas the train full sheet set